-
Product manual of glue control enzyme ZY-10
The stickies produced in the pulping process of waste paper (OCC, mow, OMG, ONP) affect the normal production, which is the biggest problem faced by waste paper papermaking. Stickies can be attached and deposited on the press blanket, paper machine parts and paper. Serious stickies problems will cause frequent end breakage, shutdown and output loss of paper machine. Stickies can be divided into large stickies and micro stickies. The particles larger than 0.1 mm are large stickies. The main components are acetate, acrylate, synthetic rubber and other special glues.
-
Defoamer F8100
Physical and chemical properties Appearance: white emulsion Density (20 ℃, g/cm3): 0.95-1.0 Viscosity (25 ℃, MPA · s): ≤300 Ionic: weak anion PH: 6.0-8.0 Performance and characteristics 1. It has strong defoaming and antifoaming performance, and lasts for a long time. 2. It does not interfere with the performance of other papermaking chemicals in pulp. It can remove bubbles in pulp and white water, effectively improve online dehydration, improve wet strength of paper, reduce pinholes and bubb... -
Wet strength agent TC-1
1.Improvetheretentionperformanceoffinefibers;2.Improvethephysicalindicatorsofpapersuchasdrytensileforce,wettensileforce,foldingresistance,breakinglength,etc;3.Longstoragetime;4.Thepaperproducedwiththiswetstrengthagenthasbetterfoldingresistanceandwetstrength; -
Surface Sizing Agent GS
1.Improve paper surface strength;2.Improve paper water resistance;3.Reduce lint and powder shedding,and improve paper sizing, smoothness,and printability;4.Solid content 30%+,lower cost per ton of paper; -
Surface sizing agent WS
1.Improve paper surface strength;2.Improve paper water resistance;3.Reduce lint and powder shedding,and improve paper sizing, smoothness,and printability;4.Solid content 30%+,lower cost per ton of paper; -
dryer fabric detail
Advantage: 1.Easy to keep clean and convenient to seam. 2.Compared with knitted mesh, the wear surface is longer and the service life is longer. 3.It is not easy to produce dry net marks, and it is easy to repair when damaged. 4. Larger air permeability can meet the needs of efficient drying. 5. The special material spiral dry net also has the characteristics of high temperature resistance, high wear resistance and aging resistance. In its paper machine clothing production base , factory has ... -
Sludge Dewatering Filter Mesh Conveyor Belt
It is an energy-saving and environmentally-friendly net mainly used for sludge dewatering in papermaking wastewater treatment plants. Due to its unique herringbone design structure, the sludge is compressed It is easy to peel off after filtration, so it is easy to clean, the water filtration effect is fast, the stability is strong, and the abrasion resistance is good. It is suitable for municipal domestic sludge, press filtration of sludge from various industries and enterprises, paper pulp squeezing, concentrated fruit juice squeezing and other special industries. According to the different types of materials handled by each industry, there are also differences. We will have a professional technical team to choose the right mesh type for you.
-
H3001 special chelating agent for pulping and bleaching
The chelating agent for pulp bleaching has a strong ability of capturing and dispersing metal ions. It can chelate with various multivalent metal ions such as calcium, magnesium, lead, zinc, iron and chromium in a wide range of pH value, and form water-soluble chromium complex which can maintain stability especially in alkaline medium and high temperature. Thus, the metal ions in the process of pulp bleaching caused by reaction precipitation scaling, bleaching agent invalid decomposition, pulp yellow and other adverse consequences. At the same time, it can protect pulp fiber and increase the dispersibility of bleach.
-
P-1 as a papermaking assistant
1. for the supporting penetrant of plant fiber raw materials for papermaking and pulping, wood raw materials (such as poplar, birch, eucalyptus, beech, spruce, Redwood, bamboo, pine leaves, masson pine, wetland pine, torch pine), non wood raw materials (such as straw, wheat grass, longiflower, banana leaf, sisal, sorghum, corn pole, reed, sugarcane slag, cotton, hemp, The deep layer hypertonic agent of rags, etc.
2. it is effective for the following pulping and cooking processes: alkali pulping, sulfite pulping, mechanical pulping, semi chemical pulp and chemical pulp.
3. compared with the previous cooking aids, the new penetrant has obvious improvement effect on shortening the pulping time, improving the pulping efficiency, saving power consumption, saving the auxiliary chemicals and improving the pulp quality. At the same time, the permeability also has obvious improvement in alkali resistance. -
Cleaning agent BC-1 for mesh blanket
The main components: emulsifier, penetrant, adhesive decomposition agent, etc. Physical and chemical properties Appearance: Colorless and transparent liquid Solid content (105 ℃, 3h,%): 18-22 PH value (1% solution, 25 ℃): 6-8 Performance and characteristics 1. The pH value is neutral and the damage to paper woven fabric is small. 2. It can penetrate into the inside of the forming net and blanket, dissolve the resin, wax, fine fiber, filler and other dirt left inside and outside the net blanke... -
Filling pre flocculation enhancer KS-300
Ks-300 is a product applied in the field of filler pre flocculation technology. The technology mainly aims at the pre flocculation modification of filler, which can improve the filling amount of filler, thus saving more fibers, and significantly improving the profitability and sustainable development of paper enterprises.
The pretreatment of fillers is to flocculate and wrap the fillers with special chemicals, and then add them to the wet end sizing system of papermaking by mixing pump. Ks-300 is suitable for the treatment of heavy calcium carbonate (GCC), talc powder, titanium dioxide and other fillers.
-
Filler pre flocculation enhancer AS-8
AS-8 is a product developed for the pre flocculation treatment of fillers. The ultimate purpose of its application is to improve the dry strength of the paper or save the amount of fiber, so as to achieve the purpose of saving production costs and bring economic competitive advantages to enterprises.
Its application mechanism is based on AS-8 to increase the particle size of fillers by pretreatment, so as to reduce the total specific surface area of fillers and increase the binding area between fibers. Therefore, it can effectively increase the strength of paper or increase the filling amount of fillers.
